RUMlogNG for Yaesu FT DX 1200?

RUMlog, the Next Generation. Completely rewritten.
DougY
Posts: 39
Joined: Wed 23. May 2018, 17:19

RUMlogNG for Yaesu FT DX 1200?

Unread post by DougY »

I have a Yaesu FT DX1200 Transceiver, and have RUMlogNG installed on my iMac. I have, in the past, been using this program for logging my Icom 746Pro QSO's with no problems.
I bought a USB 2.0 RS 232DB 9 PIn Female Serial Cable, connected it from my Yaesu Transceiver to my iMac. However, it doesn't seem to be talking to my RUMlogNG software. Anyone have suggestions to fix this issue?
User avatar
DL2RUM
Administrator
Posts: 2770
Joined: Mon 27. Aug 2007, 13:36
Location: JO40DF

Re: RUMlogNG for Yaesu FT DX 1200?

Unread post by DL2RUM »

It's not required to post a problem again and again.

See to the logging fields in the logging window. In which colours are kHz and Mode written?
Show us your TRX settings.
73 and best dx de Tom, DL2RUM
DougY
Posts: 39
Joined: Wed 23. May 2018, 17:19

Re: RUMlogNG for Yaesu FT DX 1200?

Unread post by DougY »

This looks good, when your try is configured for 4800 baud and RTS/CTS.
Attachments
RUMlogNG.png
Last edited by DougY on Sun 28. Oct 2018, 16:08, edited 3 times in total.
DougY
Posts: 39
Joined: Wed 23. May 2018, 17:19

Re: RUMlogNG for Yaesu FT DX 1200?

Unread post by DougY »

kHz & Mode.png
DougY
Posts: 39
Joined: Wed 23. May 2018, 17:19

Re: RUMlogNG for Yaesu FT DX 1200?

Unread post by DougY »

DL2RUM wrote:It's not required to post a problem again and again.

See to the logging fields in the logging window. In which colours are kHz and Mode written?
Show us your TRX settings.
http://dl2rum.de/forum/download/file.ph ... 3f78514110
Attachments
ScreenShot.png
User avatar
DL2RUM
Administrator
Posts: 2770
Joined: Mon 27. Aug 2007, 13:36
Location: JO40DF

Re: RUMlogNG for Yaesu FT DX 1200?

Unread post by DL2RUM »

Do you use a microKEYER II or DigiKEYER II? The port name doesn't look familiar.
73 and best dx de Tom, DL2RUM
DougY
Posts: 39
Joined: Wed 23. May 2018, 17:19

Re: RUMlogNG for Yaesu FT DX 1200?

Unread post by DougY »

DL2RUM wrote:Do you use a microKEYER II or DigiKEYER II? The port name doesn't look familiar.

I have NO idea what those are.... :shock:
That was the only Serial Port option on the Port drop down screen.
User avatar
DL2RUM
Administrator
Posts: 2770
Joined: Mon 27. Aug 2007, 13:36
Location: JO40DF

Re: RUMlogNG for Yaesu FT DX 1200?

Unread post by DL2RUM »

Then reset your selection to Do not use! Only the settings under the TRX tab are required.
73 and best dx de Tom, DL2RUM
DougY
Posts: 39
Joined: Wed 23. May 2018, 17:19

Re: RUMlogNG for Yaesu FT DX 1200?

Unread post by DougY »

DL2RUM wrote:Then reset your selection to Do not use! Only the settings under the TRX tab are required.
Changed to "Not Used", still no communication between my Transceiver and RUMlogNG. :roll:
User avatar
DL2RUM
Administrator
Posts: 2770
Joined: Mon 27. Aug 2007, 13:36
Location: JO40DF

Re: RUMlogNG for Yaesu FT DX 1200?

Unread post by DL2RUM »

Check again the text colour for the kHz and Mode label. In your last screen shot it is shown in blue, it should be red or green when you have configured CAT.
CAT.png
73 and best dx de Tom, DL2RUM
Post Reply