RUMtrol7000-RT 2.1 Beta 10

Control and memory management software for Icom transceivers
User avatar
DL2RUM
Administrator
Posts: 2770
Joined: Mon 27. Aug 2007, 13:36
Location: JO40DF

RUMtrol7000-RT 2.1 Beta 10

Unread post by DL2RUM »

I have added a *.csv export routine for the memories. This may be useful, if you want to edit your memories in a spreadsheet. You can find this new feature below the Memory menu.
Download here: http://dl2rum.de/rumsoft/Downloads.html your desired
package. I 'm able to test the Mac version only.
73 and best dx de Tom, DL2RUM
M0KSP
Posts: 5
Joined: Sun 1. Feb 2009, 15:19

Re: RUMtrol7000-RT 2.1 Beta 10

Unread post by M0KSP »

RUMtrol7000-RT 2.1 Beta 10 - file is corrupt ? many thanks..
User avatar
DL2RUM
Administrator
Posts: 2770
Joined: Mon 27. Aug 2007, 13:36
Location: JO40DF

Re: RUMtrol7000-RT 2.1 Beta 10

Unread post by DL2RUM »

More information about the problem would be helpful.
73 and best dx de Tom, DL2RUM
M0KSP
Posts: 5
Joined: Sun 1. Feb 2009, 15:19

Re: RUMtrol7000-RT 2.1 Beta 10

Unread post by M0KSP »

after downloading the file and trying to unzip it / i get file corrupt ?

Many Thanks for the hard work...
User avatar
DL2RUM
Administrator
Posts: 2770
Joined: Mon 27. Aug 2007, 13:36
Location: JO40DF

Re: RUMtrol7000-RT 2.1 Beta 10

Unread post by DL2RUM »

Mac? Linux? Windows?
I don't have trouble here with all three versions. Anyone else?
73 and best dx de Tom, DL2RUM
M0KSP
Posts: 5
Joined: Sun 1. Feb 2009, 15:19

Re: RUMtrol7000-RT 2.1 Beta 10

Unread post by M0KSP »

Windows.zip file...
M0KSP
Posts: 5
Joined: Sun 1. Feb 2009, 15:19

Re: RUMtrol7000-RT 2.1 Beta 10

Unread post by M0KSP »

Linux / Mac working file! unzips
M0KSP
Posts: 5
Joined: Sun 1. Feb 2009, 15:19

Re: RUMtrol7000-RT 2.1 Beta 10

Unread post by M0KSP »

Now all version working ok ?
KC2TLH
Posts: 3
Joined: Fri 30. Jan 2009, 13:05

Re: RUMtrol7000-RT 2.1 Beta 10

Unread post by KC2TLH »

Downloaded it. I've noticed that if I tell the program to read all from the radio, it will load up Bank A, and all the settings, but not the rest of the banks. Also the performance is a bit sluggish (long response times from the program).

Running an Icom IC-7000, Rigblaster Pro, and a Dell Optiplex GX280 (3.2gHz,2GB RAM, 120GB HDD). The serial port setting are 19.2K, 8/1/N, no XON/XOFF, CTS/DTR OFF. Poll timing is set to 118ms.
User avatar
DL2RUM
Administrator
Posts: 2770
Joined: Mon 27. Aug 2007, 13:36
Location: JO40DF

Re: RUMtrol7000-RT 2.1 Beta 10

Unread post by DL2RUM »

Well, when selecting "Read all from radio", the current selected bank in RUMtrol will be downloaded. This is due to the internal architecture and limitations in the Icom's CAT protocol.
When you have set the poll time to 118ms, ca. 9 commands per second will be sent to the radio. When you read all, ca. 400 commandos has to be sent, which takes 45 seconds.
73 and best dx de Tom, DL2RUM
Locked